Part Number: LX-4841
Standard Pack: 1
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Fully hardened for extra durability and to protect them from wear due to constant use
Ball check in the head prevents dirt and grit from getting into the fitting
Heavier wall thickness for extra strength
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
Stress Relieved and Tempered Carbon Steel Spring
Every fitting is individually inspected and batch tested to 5,000 PSI
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
New Cap Type Oil Filter Wrench Product Release
November 28, 2017
Fort Mill, SC - Lumax's cap type oil filter wrenches easily and safely remove hard to reach oil filters with fluted ends. Strong and durable, they provide a high torque capacity to remove even the most stubborn filters and will not damage or crush the filter. Use with a 3/8” square drive ratchet and extension with Lumax’s cap type filter wrenches.
The LX-1850 (3”) & LX-1851 (3 ¾”) are zinc-plated to resist rust and corrosion. They fit various flute designs found on AC/Delco, Fram, Gard, Motorcraft, NAPA, Sears, Step, Wix, and other filters. Both models have 15 flues.
The LX-1852, LX-1853, LX-1854, & LX-1855 are black powder coated finish to resist rust and corrosion. Precision–stamped, durable steel construction that stands up to long-term repeated use. These filer wrenches range in size from 65mm to 93mm.
Note: Do not use these filter wrenches with power tools. Be sure the fluted end of the filter matches up with the wrench.