Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1851 3-3/4”, Cap Type Oil Filter Wrench
Product Details
Part Number: LX-1851
Standard Pack: 6
Description:
Cap Type Oil Filter Wrench Size 3-3/4”, Flutes 15,
Sq. Drive 3/8"
Specifications:
-
Specially Designed Wrench removes Hard-to-Reach Oil Filters with a 15-Flute End
-
Strong and Durable: Provides High Torque Capacity to remove even the most Stubborn Filters
-
Use with 3/8” Square Drive Tool or a 1” Wrench
-
Zinc-Plated to Resist Rust and Corrosion
-
Fits Various Flute Designs found on AC/Delco, Fram, Gard, Motorcraft, NAPA, Sears, Step, Wix, and other Filters
-
Caution: Be Sure Fluted End of Filter Matches Wrench
-
Warning: Do Not Use with Power Tools