Part Number: LX-4841
Standard Pack: 1
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Fully hardened for extra durability and to protect them from wear due to constant use
Ball check in the head prevents dirt and grit from getting into the fitting
Heavier wall thickness for extra strength
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
Stress Relieved and Tempered Carbon Steel Spring
Every fitting is individually inspected and batch tested to 5,000 PSI
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
Plier & Jaw Type Filter Wrench Product Release
November 14, 2017
Fort Mill, SC - The new Lumax plier and jaw type filter wrenches allow for a wide range of oil filter applications. Lumax filter wrenches provide greater comfort and better gripping force for stuck on filters. The filter wrenches are blackened for resistance to rust oxidation and corrosion for a longer working life.
The LX-1807 is a jaws type offset oil filter wrench that fits filters from 2-1/4 in. to 4 in. (57mm-102mm). It’s a spring-loaded wrench that allows for a wider range of filter applications. The LX-1807 is made from high quality, steel construction with a comfortable cushion grip when clamping down on the filter. The open-ended band allows for easy access to multiple filter applications.
The slip joint oil filter wrenches (LX-1815, LX-1816, & LX-1817) made from high carbon drop forged steel construction for strength and durability. The slip joint handle allows for a greater range to grab the filter. The slim and adjustable design fits where other handled wrenches would not. The dual-handle allows for better leverage to bear down hard to remove stubborn tight filters. The filter wrench is blackened for resistance to rust, oxidation, and corrosion that will provide the filter wrench a longer life.
The LX-1815 fits filters from 2 in. to 5 in. (50mm-127mm).
The LX-1816 fits filters from 2-3/4 in. to 4 in. (70mm-102mm).
The LX-1817 fits filters from 3-5/8 in. to 6 in. (92mm-152mm). This filter wrench is for high torque needed to remove filters from trucks, tractors, and other heavy equipment. It fit most truck and tractor oil filters including Case, Caterpillar, Cummings, Detroit Diesel, John Deere, Mack and other heavy equipment.