Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
New Fuel Transfer Pump Kit Release
December 12, 2017
Fort Mill, SC - The Lumax LX-1377 is a heavy duty, industrial grade fuel transfer pump. This pump is ideal for pumping oil or petroleum-based products such as gasoline, diesel, kerosene, and mineral spirits. It has a highly-efficient vane design that provides faster priming, better performance, and longer life. Built from heavy-duty cast iron for durability, it is designed to reduce wear and to keep working over a long period of time. It has an explosion proof motor. It is a CSA certified pump unit, and it comes with a UL listed nozzle. It has a strainer and a by-pass valve built in to prevent damage to the pump and equipment. The pump is designed for tank and barrel mounting applications. The continuous cycle of the LX-1377 is 30 minutes.
The flow rate for the LX-1377 is 15 gallons per minute (57L/minute). The pump has a working pressure of 18 psi (1.2 bar). The pump’s voltage is 12V, 20 amps. The power cord for the LX-1377 is 16 ft. The pump kits includes the pump, automatic shut-off fuel nozzle, lockable nozzle holder, 41”x 1” steel telescoping suction pipe, 13 ft. x 3/4” anti-static wire discharge hose, and 2” threading bung adapter for barrel or tank mount.