Part Number: LX-4841
Standard Pack: 1
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Fully hardened for extra durability and to protect them from wear due to constant use
Ball check in the head prevents dirt and grit from getting into the fitting
Heavier wall thickness for extra strength
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
Stress Relieved and Tempered Carbon Steel Spring
Every fitting is individually inspected and batch tested to 5,000 PSI
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
New Diesel Transfer Pump Kit Release
December 19, 2017
Fort Mill, SC - The LX-1375 is a smooth operating, high performance, diesel transfer pump kit. It has a high strength cast-iron construction for exceptional durability. The lightweight and compact design is ideal for transferring diesel, light oils and kerosene. The self-priming pump with direct transmission and inner recirculation works to extend the pump life and preventing over-pressurization. Designed with a continuous 30-minute duty cycle and a self-priming mechanism to prevent premature motor and pump damage due to dry operation.
The smooth operating, high performance 3600 RPM, 12V DC motor efficiently transfers 8 gallons per minute (30L/minute). The working pressure is 14.5 PSI (1 Bar). The LX-1375 features a by-pass valve for motor protection and strong seals for leak protection. The pump kit comes with 3/4” aluminum nozzle and 13 ft. fuel hose. The 6-1/2 ft. battery cable with clamps is included for user convenience. A 2” threaded bung coupling barrel or tank mounting is also included with the pump.
Note: Not to be used for dispensing gasoline, alcohol, waste vegetable oil or biodiesel fuels.