Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1336 Plastic Bucket Pump
Part Number: LX-1336
Standard Pack: 6
Description:
Ideal for transferring Non-Corrosive Fluids of Light to Medium Viscosity like: Anti-Freeze, Detergents, Engine Oil, Fuel Oils, Gear Oils, Motor Oils, Lubricating Oils, Transmission Fluid, Synthetic Oils, Diesel Fuel, Jet Fuel, Kerosene, Brake Cleaner etc.
Specifications:
-
Plastic Bucket Pump with Zinc-Plated Steel Tube for transferring Noncorrosive Fluids of Light to Medium Viscosity like, Engine Oil, Gear Oils, Transmission Fluid, Machine Oil, and Antifreeze.
-
Self-Priming, Push-Down Action Pump
-
5-6.5 Gallon (20-25 L) Capacity
-
Discharge Capacity: 3 Fluid Ounces (90 mL) per Stroke
-
Drain-Back Nozzle prevents Spills and Accidents
-
Precision Nitrile (NBR / Buna-N) Seal Eliminates Bypass
-
Zinc-Plated, Corrosion-Resistant Suction Tube
-
Includes:
-
Extra Bung Adaptor (2-1/4" x 1/8 Pitch)
-
50" (1.3 m) Oil-Resistant Flex-Hose with Non-Drip Nozzle
-
-
1" (25 mm) Inlet Port and 1/4" (6 mm) Outlet Port
-
Pump Height: 20" (50 cm)
-
Net Weight: 1.8 lb. (820 g)
-
Wetted Components: Steel; NBR/Buna-N (Fluoropolymer Elastomer); Aluminum; Nylon; Polypropylene (PP); PVC
Not Recommended for Use With: Acids, Brake Fluid, Solvents, Gasoline, Soap Solutions, Corrosive Chemicals or any Fluids with Viscosity greater than 2000 SSU (SAE 30 Motor Oil).
