Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1332 Polypropylene Drum Pump
Part Number: LX-1332
Standard Pack: 2
Description:
Polypropylene Drum Pump
Specifications:
-
Lightweight Portable Pump designed for 15 to 55 Gal. (57 to 210 L) Drums
-
Nickel Plated Steel Piston for Maximum Protection against Corrosion
-
Ideal for pumping Anti-Freeze, Boric Acid, Detergent Solutions, Diesel, Formaldehyde, Formic Acid, Fruit Juices, Fuel Oils, Gasoline, Glycerine, Brake Fluid & Brake Cleaner, Isobutyl & Isopropyl Alcohol, Edible Oils, Juices, Lubricating Oils, Mineral Oil, Motor Oil, Soda Ash and other Mild Chemicals
-
Recommended Viscosity not to exceed that of SAE 30 Weight Oil
-
Pumps 8 Fluid Ounces (240 mL) per Stroke
-
2" (50 mm) Bung Bushing for Standard Drum and Tank Opening
-
Removable Discharge Spout
-
3/4" (19 mm) Outlet Port
-
Pump Height: 43" (109 cm)
-
Net Weight: 2 lbs. (90 g)
-
Wetted Components: Polypropylene (PP); Steel
Not Recommended for Use With: Strong Acids, Benzene, Bleach Solutions, Chlorine, Gasoline, Hydraulic Oil, Jet Fuels, Kerosene, Lacquers & Lacquer Solvents, Methyl Ethyl Ketone, Naphtha and Corrosive Chemicals