Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1212 30" Theromplastic, 2 Springs, 7500 PSI
Part Number: LX-1212
Standard Pack: 1
Description:
Grease Hose, 30” with 2 Springs, 1/8” NPT x 3/8”-32 UNEF, 7500 PSI, TP
Specifications:
-
30" (457 mm) , 1/8" High Quality Hose. One end has High Quality 1/8' NPT Male Thread Fitting and other end has Heavy Duty, High Quality 3/8"-32 UNEF Male Thread Fitting
-
Made of Nylon Liner, Aramid Fiber Reinforcement and Un-perforated Black Urethane Cover
-
Fully Bonded Construction to Maximize Kink Resistance and Minimize Bend Radius
-
Working Temperature Range : -40° F (-40° C) Min. to 212° F (100° C) Max.
-
Bend Radius : Meets or exceeds SAE 100 R7
-
Spring Guard provides Non-slip, Push-pull Grip and prevents accidental Kinking
-
Nominal I.D. : 1/8" (3.175 mm) / O.D. : .315" (8.0 mm)
-
Maximum Working Pressure : 7,500 PSI (517 Bar)
-
Minimum Burst Pressure : 20,000 PSI (1380 Bar)
-
Comes with Spring Guard at each end