Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1120 Deluxe Grease Gun
Recomended Accessories
Part Number: LX-1120
Standard Pack: 12
Description:
Providing more features for Professionals who demand a better Grease Gun for the punishing day-in and day-out service required by Industrial users.
Specifications:
-
Heavy-duty, LuCast TM, Cast-Alloy Head with Heavier and Reinforced Wall Thickness for Extra Strength. Develops up to 10,000 PSI (690 Bar)
-
3-Way Loading: 14 oz. (397 g) Cartridge or 16 oz. (454 g) Bulk Fill or Fill with a Filler Pump
-
Comes with Air Bleeder Valve to vent Air Pockets and Filler Nipple with Ball Check for use with Grease Filler Pump (LX-1302)
-
Heavy Gauge Steel Barrel withstands High Crush Pressures
-
Heavy-Duty Follower Spring for Consistent Priming
-
Rugged, Wide-Band, Non-Slip Knurling for Sure-Grip Handling
-
Molded Follower for Superior Seal and eliminates Grease By-Pass
-
Polished Barrel inside for Smoother Operation
-
Deluxe, Contoured Lever helps develop more Pressure with less Effort - allows to maintain Pressure for more Accurate Applications
-
Cushioned, Oil-Resistant Grip assures Firm Grip for Comfort
-
Follower Rod Lock prevents Accidental Grease Discharge while Loading and helps Easy Loading at any Position
-
Ergonomically Designed T-Handle provides Positive Grip
-
Outputs 5.65 oz. (160 g) of Grease per 100 Strokes
-
Complete with Four Hardened Jaws Hydraulic Coupler with Ball Check (LX-1400), Non-drip Cap and 6" (150 mm) Extension Pipe (LX-1424)
