Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1725 Plastic Drum Faucet, 3/4” NPT
Product Details
Part Number: LX-1725
Standard Pack: 6
Description:
Plastic Drum Faucet, 3/4” NPT recommended for dispensing Non-Corrosive Fluids, Lightweight Oils,
Mild Chemicals, most Water-based Fluids and Cleaning Solutions
Specifications:
-
For use with 15, 30 & 55 Gallon (57 L, 114 L & 210 L) Plastic or Steel Drums
-
Fits 3/4” Neck
-
Tough & Durable Polyethylene material for good resistance to Chemicals
-
Comes with leak-proof EPDM Gasket
-
Can be adjusted to dispensing position without thread damage or leakage
-
Liquid Temperature Range: 40°-140°F (4°-60°C)
-
For Non-Flammable liquids only