Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1415 Needle-type Adapter, 5" (127 mm)
Part Number: LX-1415
Standard Pack: 10
Description:
Needle-type Adapter, 5" (127 mm)
Specifications:
-
For use on Hand-Operated Grease Guns Only
-
Needle-Type Adapter for Flush or Hard-to-Reach Grease Fittings
-
For use in Confined Places, especially, the Universal Joint Fittings
-
Includes Slide-On Locking Sleeve
-
A simple Push-On Motion quickly Attaches to a Standard Grease Coupler for Quick Service
-
Zinc-Plated for Maximum Protection against Corrosion
-
Recommended Working Pressure: 3,000 PSI (207 Bar)
-
Maximum Operating Pressure: 4,500 PSI (310 Bar)
